The Align Tactical® THUMB REST TAKEDOWN LEVER integrates an ergonomic ledge for the support hand’s thumb to firmly lock down against, serving as a brake against muzzle flip to provide the fastest follow-up sight picture. Increased surface contact with the pistol reduces support hand slippage while providing an index point for a consistent high thumbs-forward grip. Swaps in seconds to offer maximum control and speed in Sig Sauer® P320® (M17/M18)® pistols for a competitive edge.
Complementing the P320® compatible takedown lever is a thumb rest that extends 30 degrees forward of the center of rotation, directing applied pressure (counter clockwise) towards the over-travel stop to rigidly remain locked in place. When used in the opposite direction (clockwise) for disassembly, rotation is easy with a simple pinch and turn of the ledge.
Establishing a two-handed grip creates a naturally angled cant of one’s support hand thumb. Incorporating a secondary receiving slope of 15 degrees allows for evenly distributed thumb pressure and serves as a guide for settling into proper contact position (with the center of the thumb’s pad “finger print” flatly pressed to the rest).
The Align Tactical® THUMB REST TAKEDOWN LEVER protrudes 0.4 inches (10mm) from the grip module for a comfortably slim footprint that creates approximately half a thumb width of effective resistance area. Horizontal serrations offer excellent traction against recoiling muzzle rise without being abrasive. Perfectly sized with aesthetics to match.
Rise to the Top:
Starting stages with a tabled pistol can make it challenging to get a grip, so we’ve given you hand. Unloaded (without magazine), the ledge wedges a lightened pistol grip into the air for unobstructed grabbing, leaving the competition grounded. Inserting a magazine drops the grip back down and shields the OFFSET Extended Magazine Release from being pressed by raising it off the table.
USPSA Production Approved:
“Are you ready?” for clearing stages faster than ever with your P320®. Upgrade to the ultimate performance components for USPSA production* class and above.
*Per Section 21.6 – Exchange of minor EXTERNAL components, our takedown lever received USPSA NROI validation under the classification and definition of approved “pins” being comprised of a cylindrical shaft that traverses through the pistol to hold things together, such as the slide assembly to the lower.
**IDPA International body validated for ESP and Carry Optics Divisions
Hardened S7 Tool Steel:
Align Tactical® selected the toughest shock-resisting steel and then hardened it for maximum strength and durability which is than finished in Black Oxide.
*Note: May need to do some modifications if using a Kydex style holster.